connection flange
英 [kəˈnekʃn flændʒ]
美 [kəˈnekʃn flændʒ]
【化】连接法兰
双语例句
- Connection: solvent cement, fusion, flange.
连接方式：粘接，焊接，法兰连接。 - When attached with pipes of different materials or pipe accessories, PE pipes can employ PE/ Steel transition connection or flange connection, which is quick and convenient.
PE管道与其他材质管道及管路附件连接时，可采用钢塑过渡连接或法兰连接，连接方便、快捷。 - The thimble and valve body has the thread connection, the place around the thimble has the flange.
顶针与阀体用螺纹连接，顶针的周边做有凸缘。 - Used mainly in connection, the flange connect is the construction of the important connections way.
法兰产品主要用于连接，法兰连接是管道施工的重要连接方式。 - For convenient assembling, a connection short pipe and connection flange are positioned at the inlet and outlet.
为了便于装配，在进、出口处均设有连接短管及连接法兰。 - Roll Extrusion Forming Process of Insert Connection Flange and Its Equipment Characteristics
插接式法兰滚压成型工艺及设备特点 - Input mode: direct motconnecting, motbeing connected with strap, input shaft connection flange.
输入方式：电机直联、电机皮带联接或输入轴、联接法法输入。 - The valve can be installed in horizontal or vertical. Add seal cushion between two flanges connection and screw down bolt. Press the gasket firmly into the flange cavity ensuring that the sealing lip is pointed outward.
本阀可水平或垂直安装，安装时两法兰连接中间必须加密封垫片，然后均匀锁紧螺栓。将邻近的法兰或管道定位到美国瓦茨法兰适配器上，安装剩下的螺栓。 - By the connection type can be divided into the flange connection and connect to the clip-on;
按连接型式可分为法兰连接和对夹式连接； - To spherical hinge connection at one end, damper of flange connections at one end and the other end supported by flange connections are made into spherical hinge connections.
对于一端球铰连接，一端法兰连接的阻尼器，与法兰连接支撑的另一端也做成球铰连接。 - In this paper, the finite element method is applied to study the capability of simple supported beam with external prestressed cable and the effective width of flange. The influence of shear connection rigidity on the effective width of flange and the effect of prestress increment are analyzed.
采用有限元方法，研究了体外预应力作用下简支组合梁混凝土有效翼缘宽度，分析了剪力连接刚度对预应力组合梁有效翼缘宽度的影响和预应力增量的效应。 - The Simple Connection between Teletransmission Transmitter and Concave Flange
远传变送器与凹面法兰的简便连接 - It was concluded that the stress concentration occurred at the connection of rail web and rail flange.
得出的结论是钢轨焊接接头在轨腰和轨底连接处是应力集中的区域。 - Discussing of the Sealing Failure of the Hydrocracking Reactors Nozzle Connection Flange
加氢裂化装置反应器系统接管法兰密封失效原因分析 - Relatively speaking, the slot connection reduces the stress concentration of beam flange weld, and increases obviously the flexible capacity of connections. Therefore, it minimizes the possibility of connection fracture.
比较而言，槽型工艺孔的梁柱焊接节点设计能有效降低梁翼缘焊缝处的应力集中，明显提高节点的柔性，对于降低梁翼缘焊缝在地震载荷作用下断裂的危险较为有效。 - The flange joint is a common connection form of high-rising steel tower structure, and bolt looseness of flange is the damage with facilitated occurrence in the structure.
法兰连接是输电线塔等高耸钢结构中常用的一种连接方式，法兰处螺栓的松动是结构容易发生的损伤。 - The effects of flaw, connection, flange and form of knee on fatigue strength of beam brackets are discussed.
在此基础上，讨论分析了焊接缺陷、连接形式、肘板形状以及折边等因素对梁肘板疲劳性能的影响。 - Pump sump is the connection between the flange of the inlet of the pump and the inlet of the impeller.
水泵吸水室就是泵的进口法兰至叶轮进口的过流部分。 - According to character of steel skeleton plastic clad pipe, it introduces its construction process from electric melting connection 、 flange connection and metal plastic transition joint connection, application analysis of engineering is done, and indicates its good performance.
根据钢骨架塑料复合管的性能特点，从电热熔连接、法兰连接、钢塑过滤接头连接介绍了钢骨架塑料复合管的施工工艺，并进行了工程应用分析，阐明了其优良的综合性能。 - The connection without diaphragm usually fails by the yield-line mechanism on column flange, so it is weak in terms of low initial stiffness and resistance.
无补强节点通常在柱翼缘形成塑性铰线屈服破坏，因此节点的初始刚度和塑性极限弯矩都很低，节点较柔； - The structure of beam-colunm welded connection affects the bearing-load circumstance of flange weld obviously.
梁柱焊接节点构造对梁翼缘焊缝的承载环境有明显的影响。 - Optimization design for back-wall shape of bell-like inlet passage in mixed-flow pump Pump sump is the connection between the flange of the inlet of the pump and the inlet of the impeller.
钟形进水流道吸水室后壁的优化设计水泵吸水室就是泵的进口法兰至叶轮进口的过流部分。 - For WFP connection, the flange plate was welded to beam flange by fillet welds, and welded to column flange by butt welds, while the beam flange was free to column flange.
焊接翼缘板式加强连接（WFP）是一种钢结构改进型刚性连接，加强板与梁的翼缘采用角焊缝连接，柱翼缘采用对接焊缝连接，梁翼缘不直接与柱翼缘连接。 - For three connection methods of waveguide, the positioning error of waveguide flange is calculated by minimax method.
针对波导的三种联接方式，用极大极小法对波导法兰的定位误差进行了计算。 - Analysis of results showed that the connection with the column flange strengthened by backing-plates can increase the bending capacity of the column flange and prevent punching shear bending failure around bolt holes. This paper gives the recommended thickness value of backing-plates.
分析结果表明，柱翼缘设置背板后，可以增大柱翼缘的抗弯能力且可以防止螺栓开孔处的冲切弯曲破坏，并给出背板厚度的建议值。 - Connection performance by setting Morris Stiffener is a little lower than the connection with horizontal, diagonal stiffeners and the column flange strengthened by backing-plates. It can be used to medium-sized projects which bears smaller load and requirements of shorter construction period.
设置Morris加劲肋的端板连接节点性能比带有横向、斜向加劲肋且柱翼缘带有背板的节点性能稍低，可以用于承受荷载较小，要求施工工期短的中小工程。 - It is can be drawn that the connection with horizontal, diagonal stiffeners and the column flange strengthened by backing-plates have a better performance. It can replace our traditional approach to strengthen the column flange.
从中得出，带有横向、斜向加劲肋且柱翼缘带有背板加强的节点性能较好，能够代替我国传统的柱翼缘加强节点做法。 - By using the finite element programs with considering material nonlinear and geometric nonlinear, the influence on the behavior of flange reinforced dog-bone connection with widen beam flange length, weakened beam flange length and depth are discussed respectively.
采用考虑材料非线性、几何非线性的有限元程序分别研究了这些参数的取值对翼缘加强型狗骨式节点受力性能的影响。